VEX Robotics Wiki

Covering VEX IQ, VEX EDR, and VEX Pro

User Tools

Site Tools


vex_robotics_platforms:vex_edr:motors_and_controllers:servos

This is an old revision of the document!


Table of Contents

(Servos)

While very similar in appearance, motors and servos are suited to distinctly different types of tasks. Servos are incapable of making a full rotation. Vex Servos are limited to about 100 degrees of rotation, but have the invaluable ability to self-correct to maintain any specific position within the set boundaries.

Like motors, Servos operate off of a PWM signal between 0 and 255 (or -128 to 127, depending on development environment), except servos use that signal to move to a specific position at a constant speed set by the manufacturer.

Specifications

  • Rotation:100 degrees
  • Stall Torque:6.5 in-lbs
  • Voltage:4.4 - 9.1 Volts (Motor life will be reduced operating outside this range)
  • PWM Input:1ms - 2ms will give full reverse to full forward, 1.5ms is neutral
  • Black Wire:Ground
  • Orange Wire:Power
  • White Wire:PWM signal
  • Current Draw:20mA to 1.5 A per Servo

1)

vex_robotics_platforms/vex_edr/motors_and_controllers/servos.1495674607.txt.gz · Last modified: 2017/05/25 04:10 (external edit)